创盈彩钢复合板在我们的日常生活中可以经常看到，具有方便施工、质量轻、强度硬的特点。复合板的胶粘剂不仅操作方便，粘合强度高，而且采用科学的预聚改性工艺，使胶水初粘性更好，粘结更牢固，下面就来介绍一下它的使用方法。

创盈Color steel composite panels can be frequently seen in our daily life, with the characteristics of convenient construction, light weight, and hard strength. The adhesive for composite boards is not only easy to operate and has high bonding strength, but also adopts a scientific pre polymerization modification process to improve the initial adhesion of the adhesive and make it more firmly bonded. The following will introduce its usage method.

1、彩钢复合板板材的粘胶面要求清洁，干燥，无油脂。

1. The adhesive surface of color steel composite board should be clean, dry, and free of grease.

2、胶粘剂主剂在取出前要搅拌均匀。

创盈2. The main adhesive agent should be stirred evenly before removal.

3、彩钢复合板板材施胶面如有涂层，油漆等轻先做试验，胶水施胶温度为5度-40度之间。

创盈3. If there is a coating or paint on the adhesive surface of the color steel composite board, the test should be conducted first. The adhesive application temperature should be between 5 ° C and 40 ° C.

创盈4、复合前要确保胶水表面没有干，以防影响粘结效果。

4. Before compounding, ensure that the surface of the adhesive is not dry to prevent affecting the bonding effect.

创盈5、常温（25度）压合需要4个小时，操作时根据实际温度延长或缩短压合时间。

5. Pressing at room temperature (25 degrees) takes 4 hours, and the pressing time should be extended or shortened according to the actual temperature during operation.

6、胶水初始固化后，把彩钢复合板放到一边，一周后方可用于工程。

创盈6. After the initial solidification of the adhesive, place the color steel composite board aside and wait for one week before it can be used in the project.

本文由济南彩钢板提供技术支持，更多的详细精彩内容请点击我们的网站http://szhongmu.com创盈，我们将会全心全意为您提供满意的服务。

This article is supported by Jinan Color Steel Plate. For more detailed and exciting content, please click on our website http://szhongmu.com We will wholeheartedly provide you with satisfactory service.